- About the Honeywell Voyager 1200g Barcode Scanner
- Installing
- Enabling UPC-E Support
- Disabling UPC-E Support
(Image courtesy of Honeywell®)
About the Honeywell Voyager 1200g Barcode Scanner
The Honeywell Voyager 1200g barcode scanner scans linear barcodes of products. The scanner can also be used to scan identification badges with linear barcodes.
Installing
Plug the USB cable into a USB port on the touchscreen or USB hub.
Warning! Do not plug the USB cable into the printer!
Enabling UPC-E Support
The default configuration of the Honeywell® Voyager 1200g barcode scanner does not support UPC-E (the leading zero and the check digit (last digit) are not transmitted when a UPC-E is scanned).
To enable UPC-E support for the scanner, you will be required to scan the two codes below. To do so, print this browser page, and then scan the codes from the printed page.
Disabling UPC-E Support
To disable UPC-E support for the scanner (in which the leading zero and the check digit (last digit) are not transmitted when a UPC-E is scanned), you will be required to scan the two codes below. To do so, print this browser page, and then scan the codes from the printed page.