The Brecknell® scale is for use on a POS quick service station to allow for the weighing of containers
This topic explains how to configure the Brecknell 6700U Series scale to interface with a MealSuite POS quick service station. The configuration involves selecting the “continuously output” mode for the scale’s USB (Com 1) port. Complete the following steps:
- Enter the configuration menu by pressing both the HOLD/PRINT button and ZERO/ON OFF button for three seconds. The screen will display CONFG.
- Navigate to the User menu by pushing the UNIT button until USEr appears (screenshot below).
- Push the TARE button once to enter the User menu.
- Navigate to the Com 1 menu by pushing the UNIT button until Con 1 appears (screenshot below).
- Push the TARE button once to enter the Com 1 menu.
- Navigate to the Output menu by pushing the UNIT button until oUt.nd appears (screenshot below).
- Push the TARE button once to enter the Output menu.
- You can now select the “continuously output” mode:
- Push the UNIT button until CoNt appears (screenshot below).
- Push the TARE button once to select the “continuously output” mode.
- Return the scale to weigh mode by pushing the ZERO/ON OFF button until the unit beeps. The scale will go through a digit check and then display 0.0 when in weigh mode.